您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE J1402 Automotive Air Brake Hose and Hose Assemblies

作者:标准资料网 时间:2024-04-29 07:20:26  浏览:9087   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J1402
Title:Automotive Air Brake Hose and Hose Assemblies
Issuing Committee:Hydraulic Hose And Hose Fittings Committee
Scope:This recommended practice covers minimum requirements for air brake hose assemblies made from reinforced elastomeric hose and suitable fittings for use in automotive air brake systems including flexible connections from frame to axle, tractor to trailer, trailer to trailer and other unshielded air lines that are exposed to potential pull or impact. This hose is not to be used where temperatures, external or internal, fall outside the range of -40 to +200 掳F (-40 to +93 掳C).
下载地址: 点击此处下载
Product Code:SAE AMS5517
Title:Steel, Corrosion Resistant, Sheet and Strip, 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa) Tensile Strength
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion-resistant steel in the form of sheet and strip.
基本信息
标准名称:橡胶 热导率的测定 热线法
英文名称:Rubber - Determination of thermal conductivity by means of hot -wire method
中标分类: 化工 >> 橡胶制品及其辅助材料 >> 橡胶制品综合
ICS分类: 橡胶和塑料工业 >> 橡胶
替代情况:替代GB/T 11205-1989
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2009-04-24
实施日期:2009-12-01
首发日期:1989-03-31
作废日期:
主管部门:全国橡标委通用试验方法标准化分技术委员会(SAC/TC 35/SC 2)
提出单位:中国石油和化学工业协会
归口单位:全国橡标委通用试验方法标准化分技术委员会(SAC/TC 35/SC 2)
起草单位:西北橡胶塑料研究设计院
起草人:高云、朱伟
出版社:中国标准出版社
出版日期:2009-12-01
页数:8页
计划单号:20073206-T-606
适用范围

本标准规定了用热线法测定橡胶材料热导率的方法。
本标准适用于硫化橡胶和未硫化橡胶热导率的测定。
本标准不适用于遇水膨胀橡胶和含金属粉末的橡胶。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T2941 橡胶物理试验方法试样制备和调节通用程序(GB/T2941-2006,ISO23529:2004,IDT)

所属分类: 化工 橡胶制品及其辅助材料 橡胶制品综合 橡胶和塑料工业 橡胶